安家岭储煤场输煤暗道通风除尘技术应用研究

针对输煤暗道的生产工艺现状，提出了采用通风与密闭抽尘净化技术，结合转载落料点密闭干雾降尘等技术措施，实现了输煤暗道内粉尘的的综合治理，通过粉尘浓度在线监测系统进行智能化控制，实现对输煤暗道通风除尘系统的远程连续监测监控，输煤暗道转载点下风侧5 m作业人员通行的位置总粉尘浓度由380.8 mg/m3降至19.8 mg/m3，降尘效率达94.8%，呼吸性粉尘浓度从96.7 mg/m3降至8.4 mg/m3，降尘效率达91.3%，降尘效果较好，有效地解决了输煤暗道及其转载落料点的粉尘污染问题，为输煤暗道内的粉尘防治提供参考依据。     

Paper mill sludge as a renewable substrate for the production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337

In the present study, pre-treated paper mill sludge (PMS) was evaluated extensively as a substrate for production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337. The PMS was subjected to three types of pre-treatment methods namely alkali, mechanical, and thermal treatment and was analyzed by SEM. The pre-treatment of PMS by alkali was observed to be more effective over the other pre-treatment methods. The alkali pre-treated sludge was then made to undergo fermentation, which showed the conventional process of acidogenesis followed by solventogenesis. The acetone, butanol, and ethanol concentration for 15% alkali pre-treated PMS was estimated to be maximum.     

湿法磷酸净化脱砷的研究现状

随着食品、医药及电子行业的不断发展，磷酸及磷酸盐的市场需求量不断增大，并且对磷酸的品质要求也越来越高，尤其是对湿法磷酸中砷杂质的要求，湿法磷酸中砷的含量将直接影响其在磷精细化工领域的应用，因此湿法磷酸中砷的高效、安全去除是亟待解决的一大难题。本文主要对湿法净化磷酸脱砷技术的研究情况进行综述，比较了几种湿法净化磷酸脱砷工艺的优缺点，介绍了较常见的化学沉淀法、结晶法，以及新兴的电沉积法、垂直区域熔融法和微反应器脱砷工艺的应用前景，并指出这些新兴的脱砷工艺将成为今后湿法磷酸的净化脱砷的发展方向，如能解决将这些脱砷工艺在实际中的问题，将会对磷酸工业的发展提供一个更有力的支持。     

Preparation of fused silica membrane with high performance for high temperature gas filtration by sealing and spray coating

In order to improve the gas permeability and thermal shock resistance of the ceramic membranes applied in high temperature gas-solid separation techniques, fused silica and graphite particles were used as the primary raw material and pore-former agent, and the spray coating based-on PVA sealing was applied to prepare the separation membrane. These approaches remarkably decreases filtration resistance by increasing support permeability and reducing the intrusion of ceramic membrane forming particles into the support as well as the thickness of the membrane. The fabricated membrane had an average pore diameter of 9.85?μm and a gas permeability value of 8.2?×?10⁴?m³/(m² h bar), its dust removal efficiency reached 98.6%.     

固体碳直接还原钢铁厂含锌固废的理论与实践

 钢铁厂内的含锌固废数量巨大，同时富含铁、碳等元素，是可循环再利用的二次资源。通过固体碳直接还原ZnO和FeO的热力学分析，发现在非标准状态下，ZnO的还原条件要优于FeO。为此，在实验室条件下设计了含锌固废在不同温度和时间下的还原试验，发现在还原温度为1 423 K、还原时间为15 min以上时，脱锌率可达到90%，而铁的金属化率需要在1 573 K时才能接近90%；在还原温度低于1 423 K时，还原时间对脱锌率的影响较大；在还原温度高于1 473 K时，还原温度对脱锌率影响较小，同时脱锌率可达到95%。这些结果对国内当前处理含锌固废主要工艺(回转窑、转底炉)的操作制度设置具有重要的参考价值，也为如何选择合理的工艺路线，以低投入、低运营成本实现含锌固废的再利用提供了理论依据。     

The application of decision support tools and the influence of local data in prioritizing barrier removal in lower Michigan,USA

Web-based decision support tools (DSTs) can be useful to facilitate decision-making processes for managing complex natural resource systems. However, the alignment of DSTs with the objectives in governmental policies or management plans and the influence of limited local data on the outputs of these tools may reduce the use of DSTs by decision makers. In this study, we examined the outcomes of web-based DSTs when different types of local data were incorporated and demonstrated a way to incorporate outputs from multiple DSTs or local inventories to benefit barrier removal decisions. Restoring habitat connectivity in rivers in northwest lower Michigan, USA, was used as a case study due to the abundance of local inventory data and web-based DSTs. We found that, when compared to prioritizations made using local data, some DSTs could produce similar outcomes (in barriers selected, cost, and the benefit for migratory fish) with limited data, but the trade-offs among users' objectives might influence the cost and effectiveness of DSTs' outputs. Improving the ability of DSTs to incorporate objectives consistent with policy and stakeholders' values (e.g., restore certain species or sedimentation control) across management scales can help close the gap between tool recommendations and management decisions while making the barrier removal prioritization process transparent and efficient.     

On‐site wastewater treatment using reactive filter media

The aim of this study is to reduce the phosphate concentration in treated wastewater using a small amount of the reactive filter media, Filtralite P. Biologically treated wastewater was passed through a filter with 215 g of Filtralite P. In the laboratory, the phosphate removal efficiency was 51% at a flow speed of 0.87 m/h. Under real conditions, in an experimental stand filled with 0.5 m³ of Filtralite P, the phosphate removal efficiency was 85% and the removal efficiency of total suspended solids was 57% after a 5‐month period. The residual phosphate concentration in the filtrate from the experimental stand was 1 mg/L of PO₄‐P after the 5‐month period. The experimental filtration plant was buried in the ground, and it did not freeze and worked well under winter conditions. The results of this study can be useful in the design and development of tertiary wastewater treatment plants in view of their sustainability potential.     

Experimental and computational study on the separation performance of an electrostatic precipitator with curved transvers collecting plates

Aiming at the problems of low collection efficiency of fine particulate matter and large area occupied by existing electrostatic precipitators (ESP), a new type of horizontal electrode ESP is proposed. It has the advantages of accelerating turbulent coalescence, increasing the effective dust collecting area and increasing the particle driving speed. The performance of the new type of ESP is systematic studied through simulation and experiment at the same time, and the results matches well. By comparing the dust removal effect of the horizontal electrode ESP and the conventional ESP, it can be concluded that the horizontal electrode ESP has a better dust removal efficiency, and can still maintain a better dust removal effect under high air velocity. The dust removal efficiency of new ESP can reach above 98% under the experimental conditions.     

运营高速公路 40m 预制箱梁拆换施工技术研究

对于运营高速公路40m箱梁拆换施工，梁体的切割、吊装、运输、架设等受作业空间和环境的限制，增加了施工困难和风险，新旧箱梁在高速公路上的长距离运输为施工增加了成本和安全风险，同时也决定了箱梁拆换的总体进度。韩河大桥梁体拆换工程按期顺利实施完成，有效化解了以上问题，取得了良好的经济、社会效益。